Racing Lane Line Holders

Image Full
image1

Specification

Type: Standard or Jumbo model.

Material: Stainless steel AISI 316

Finish: Non-slip cover minimum 20 microns

Measurements:

154 x 2mm (standard), length of tube 365mm

204 x 2mm (jumbo), length of tube 365mm

(different lengths of tube available upon request)

Thickness of lid: 10mm (round top)

Facilities: Hook on underside of top, lockable cover

Earthing: Earthing lug fitted the bottom of the fitting, square top optional

Construction: According to DIN EN 13451

Application: In pool deck for racing lane line storage

Installation: May be cast in, or retro-fitted by core drilling in floor and epoxy resin bonding

Options: Lane conductor (article number 0000029PGL )

60 minutes fire-resisting (article No. 0000029PBW)

VDH platform transit key (article No. 0000029PSL)

Schematic View

schematic view of lane line holder

VDH round Racing Lane Line Holder (Through-Deck Fitting)

Stainless steel VDH Through-Deck Fitting for providing storage under the pool deck; 154mm external diameter tube for standard racing lane lines, 204mm external diameter tube suitable for jumbo racing lane lines. The outside of the tube has Scotch-Clad finish for improved bonding. The one-piece Through Deck Fitting comprises a stainless steel tube with hinged water-resistant cover including rubber gasket, hinge and lock. The cover top has a non-slip finish minimum 20 microns.

Storage Bags For Racing Lane Lines

Description

Storage Bags designed to be suspended from the underside surface of the pool slab directly underneath each VDH Racing Lane Line Holder, each bag designed to hold one racing lane line.

Specification

Manufactured from 400 gram strengthened PVC material, with a metal eyelet in the bottom for drainage and one metal eyelet in each corner for hanging.

Fixings

It is recommended a set of fixings should comprise Hilti M8 wedge anchor with carabina, M8 eyebolt 50mm x 20mm eye, M8 throughbolt 100mm long in 316 grade stainless steel, or other similar system. Four sets of fixings are required for each Storage Bag.

Dimensions

Standard 25m racing lane lines size 1500 x 600 x 600mm

Standard 50m racing lane lines size 1500 x 800 x 800mm

Jumbo 25m racing lane lines size 1500 x 1000 x 1000mm

Jumbo 50m racing lane lines size 1500 x 1200 x 1200mm

Anti Wave Racing Lanes

Anti Wave Racing Lane Lines with discs made from UV stabilised HDPE, and the intermediate floats are made from high density polypropylene. Jumbo racing lane lines have one float between each disc to give added buoyancy, whilst the standard racing lane lines have one float every two discs.

The centre cable is manufactured from 316 stainless steel 3.1mm diameter designed to withstand a maximum force of 5 Kn

The Super Tensioner end fitting to adjust the length of the racing lane lines is designed to rotate around the cable; it is easy to adjust with no parts to lose, it cannot be released accidentally and will not fray the stainless steel cable.

The Anti Wave racing lane lines come complete and ready assembled with all fittings. They may be delivered either in FINA colours, or made to customers’ requirements as the discs are available in red, white, blue, green, yellow and black.